Barbican® Defender Xtreme A1 (SR1) | Industrial Security Fencing

Barbican® Defender Xtreme A1 projects a powerful visual statement in perimeter protection with a clear anti climb design. The security fence has cranked square bar pales which are designed to prevent intruders from climbing or scaling the fence, whichever side it is approached, and is ideal for commercial and industrial applications.

25 year service life guarantee

Enquire about this product

Get a quote for this productSpecify Us

installation-by-jacksons-250-250We provide nationwide installation for all of our security fencing, gates, and acoustic barriers. Installation is carried out by our experienced gangs who have extensive knowledge of our products and install to our premium standards. Let us know if you require installation when you make an enquiry using our product quote form or by calling us.

Barbican SR1 Features

  • LPS 1175 A1 (SR1) approved   
  • Secured by Design preferred specification
  • Fully welded pale-through-rail construction
  • Seamless, concealed rail to post fixing
  • Provides high visibility for natural surveillance 
  • Anti-climb design
  • SR1 gate available

 

LPCB product page logo banner

Panels

Constructed as per Barbican® panels but pales are extended 400mm and cranked 320mm from the top rail, with each point cut at 45 degrees to form a point. Pale spacing is at 129mm centres (96mm gap). 

Gates

A1 gates available.

Barbican® Defender Xtreme A1 Panel Specifications

 
Height (mm) Post Centres (mm)
Post Dimensions (mm)
Overall Post Length (mm)
2250 2484 80 x 60 3050
2500 2484  80 x 60 3300
3000 2484 80 x 60  3800

Post Options

  • Overlength set in concrete as standard
  • Baseplated to bolt down onto concrete
  • Cranked to suit wall mounting
  • Comparison tool list

    Compare this product

    Use our comparison tool to help you compare features, applications, heights and finishes of this product with our wider product range.

    Standard Finishes
  • Hot dip galvanised to BS EN 1461 as standard
  • Hot dip galvanised and powder coated to BS EN 13438 in one of our standard colours at extra cost
  • Powder coating to non standard BS or RAL to special order
  • Marine coating for applications near sea water (optional extra)
  • Explore our finishes below

    Finishes

    Standard Colours
  • Black RAL 9005
  • Green RAL 6005
  • Grey RAL 7012
  • Blue BS 20-C-40
  • Blue RAL 5010
  • Red RAL 3020
  • Yellow RAL 1018
  • Brown RAL 8017
  • White RAL 9010
  • Other colours are available on request

  • Standard powder coating colours:

    RAL colours steel fencing

    Document Downloads

    Download specification documents, drawings and case studies for this product

    LPS 1175 A1 fencing

    About A1 (SR1) Fencing

    A1 fencing has been tested and certified to provide the minimum level of protection against opportunistic attacks after undergoing the LPS 1175 test devised by LPCB. During testing our fencing had to delay several attacks using category A tools such as screwdrivers, pliers, and small knives, each lasting at least 1 minute, providing it with a rating of A1 under Issue 8, the equivalent of SR1 under Issue 7. Find out more and view the full product range here.

    Top