LPS 1175 security rated fencing

Trident® 5 | Security Fencing

Trident® 5 has been certified to LPS 1175 E10 after passing the test devised by LPCB in which it withstood several attacks from battery powered tools used by fire and rescue services, with each tool given a maximum attack time of 10 minutes. 

The fence comprises of reinforced 32mm tubular vertical bars welded within 60mm x 40mm horizontal rails. The panels incorporate "358" Securi-Mesh® clad on both sides, with an optional 800mm concertina barbed tape topping.

25 year service life guarantee

Enquire about this product

Get a quote for this productSpecify Us

Compare this product

Use our comparison tool to help you compare features, applications, heights and finishes of this product with our wider product range.

Trident® 5 Features

  • LPS 1175 E10 (SR5) approved   
  • Closely spaces pales of substantial wall thickness
  • Incorporating cut-delay technology 
  • Jaktronic® PIDS compatible
  • SR5 gates available


LPCB product page logo banner


E10 gates available

Trident® 5 Panel Specifications

Height (mm) Panel Width (mm)
Post Dimensions (mm)
4200 2570 120 x 120 Concertina barbed wire

Post Options

  • Overlength set in concrete as standard
  • Baseplated to bolt down onto concrete
  • Cranked to suit wall mounting
  • Standard Finishes
  • Hot dip galvanised to BS EN 1461 as standard
  • Hot dip galvanised and powder coated to BS EN 13438 in one of our standard colours at extra cost
  • Powder coating to non standard BS or RAL to special order
  • Marine coating for applications near sea water (optional extra)

    Standard Colours
  • Black RAL 9005
  • Green RAL 6005
  • Other colours are available on request

    Document Downloads

    Download specification documents, drawings and case studies for this product


    About E10 (SR5) Fencing

    E10 fencing has been tested and certified to withstand serious attempts at forced entry after undergoing the LPS 1175 test devised by LPCB. During testing, our fencing had to delay several attacks using category E tools such as a circular saw and reciprocating saw, each lasting at least 10 minutes, providing it with a rating of E10 under Issue 8, the equivalent of SR5 under Issue 7. Find out more here.