Our other sites:
Hostile Vehicle Mitigation
Speed Gate | PAS 68 Bi Folding Speed Gates
Our PAS 68 Bi-Folding Speed Gates are rated to prevent vehicle borne attacks. The design is capable of blending seamlessly with any building or site perimeter line, enabling discreet vehicle mitigation.
The gates offer approx. 8 second open cycle and deliver a continuous operation – 100% duty cycle. A minimal foundation depth of nominal 410mm is required, making them ideally suited to shallow and or/utility congested substructures. Clear opening of up to 4.2m maximum.
Jacksons' speed gates are able to accept any architectural enhancement over and above its standard construction whilst maintaining the PAS 68 rating, lending itself to continuance of any high security fencing specification, powered fence, or security toppings across the normally vulnerable vehicular entrance to the site.
PAS 68 Bi-Folding Speed Gate Features
- 8 second open cycle
- Clear opening of 4.2m maximum
- Trackless design, no height restrictions and lower maintenance
- Galvanised or galvanised and powder coated
- Able to stop a 7500kg heavy goods vehicle travelling at up to 50 mph
Crash Test Results
PAS 68 Bi-Folding Speed Gate Specification
|
Open Cycle Time |
Approx 8 Secs |
|
Duty Cycle |
100% |
|
Main Supply |
230v 50Hz Single phase 16amp |
Finishes
Safety
Comes as standard with CAT 3 safety edges and light curtain. Additional safety options by laser safety devices to protect the danger zones.
PAS 68 Bi-Folding Speed Gate® Specification
| Height (mm) | Width (mm) |
| 2500-3000 | 1500-4200 |
Document Downloads
Download specification documents, drawings and case studies for this product
Vehicle Security Barrier Range
Browse our individual hostile vehicle mitigation products or view the full range below.
Browse Products
Top