RoSPA approved play area fencing

Anti Trap Bow Top Fencing

Anti Trap Bow Top fencing is designed to provide permanent protection for a variety of applications including schools, parks, and play areas. It features our welded tubular pale-through-rail design and vandal proof connectors to provide a strong structure without visible joints.

A key point in the design is the wider gap between each hoop above the top rail, to prevent children getting their heads, necks or limbs stuck between pales. The design conforms to playground standard BS EN 1176.

Anti Trap Bow Top Fencing correspond(s) to the generic  component/material "steel" in the BRE Global Guide online generic specification(s) "Galvanised steel railings" which achieve(s) a summary rating of B within commercial, domestic, residential, health, industrial, education.

25 year service life guarantee

Enquire about this product

Get a quote for this productSpecify Us
Anti Trap Bow Top Fencing Features

  • 19mm pales with domed top caps
  • 2737mm wide panels
  • Posts 60.3mm
  • Panels can be manufactured to accommodate sloping ground

Product page logo banner no sbd


Two horizontal rails 50 x 25mm with vertical round hollow section 19mm pales are passed through the top and bottom rail welded into position. Every other bow with a pale is replaced with a domed plastic insert, creating a larger gap above the top of the rail, whilst keeping the gap between the paling inside the top and bottom rail under 100mm.


  • Matching single leaf and double leaf gates available.
  • Self closing operation for gates
  • Slide latch
  • View Gates

    Anti Trap Bow Top Fencing Specification

    Height (mm) Post Centres (mm)
    Post Dimensions (mm)
    Overall Post Length (mm)
    1000 2775 60.3 Ø 1500
    1200 2775 60.3 Ø 1800
    1500 2775 60.3 Ø 2100 
    1800 2775 60.3 Ø 2500 

    Post Options

  • Overlength set in concrete as standard
  • Baseplated to bolt down onto concrete
  • Cranked to suit wall mounting
  • Standard Finishes
  • Hot dip galvanised to BS EN 1461 as standard
  • Hot dip galvanised and powder coated to BS EN 13438 in one of our standard colours at extra cost
  • Powder coating to non standard BS or RAL to special order
  • Marine coating for applications near sea water (optional extra)
  • Explore our finishes below


    Standard Colours
  • Black RAL 9005
  • Green RAL 6005
  • Grey RAL 7012
  • Blue BS 20-C-40
  • Blue RAL 5010
  • Red RAL 3020
  • Yellow RAL 1018
  • Brown RAL 8017
  • White RAL 9010
  • Other colours are available on request

  • Standard powder coating colours:

    RAL colours steel fencing

    Related products

    Jacksons Security has a range of products relating to this article, all complete with our 25 year service life guarantee. If you cannot find the item you are looking for, please do not hesitate to call our friendly sales team.